Pump, Waterway Executive 48, 2.0HP, 230V, 10.5/2.6A, 2-Speed, 2"MBT, SD, 48-Frame : 3420820-1A
Product details
Executive Jet Pump
Committed to innovation & excellence since 1973
Executive wet end designed to fit 48 & 56-frame motors with large 2 & 2 ½" intake for improved flow performance and reduced noise. Thermally protected to extend life expectancy of motor.
Additional Information
Features-
-Executive wet end designed specifically for 48-frame motors
-Large 2" intake for improved flow performance and reduced noise
-Large 6" diameter wet end for higher head pressure
-Thermally protected to extend life expectancy of motor
-Highly versatile wet end can be rotated every 90°
-Silicone carbide seals, Viton bellows, 316SS casing
-Executive wet end designed specifically for 48-frame motors
-Large 2" intake for improved flow performance and reduced noise
-Large 6" diameter wet end for higher head pressure
-Thermally protected to extend life expectancy of motor
-Highly versatile wet end can be rotated every 90°
-Silicone carbide seals, Viton bellows, 316SS casing
Specifications-
Horsepower- 2
Voltage- 230
Amps- 10.5/2.6
Intake and Discharge- 2" MBT
Flow Rate- 175 GPM
Frame Size- 48Y
Horsepower- 2
Voltage- 230
Amps- 10.5/2.6
Intake and Discharge- 2" MBT
Flow Rate- 175 GPM
Frame Size- 48Y
NOTE - Does not include unions or pump cord
*Product Change Notification*
Product- All Executive Wet Ends and Pumps
In order to accommodate for the growing demand of wet ends and pumps, Waterway will be removing two
of the three drain plugs located on the front of the wet end. The two side ports are rarely used. For those
instances where they’re required, the drain plug ports can still be drilled and tapped on location. This change will be introduced as a running change starting immediately.
If you have any questions regarding this notification, please contact a technician or customer service representative to assist you.
Product- All Executive Wet Ends and Pumps
In order to accommodate for the growing demand of wet ends and pumps, Waterway will be removing two
of the three drain plugs located on the front of the wet end. The two side ports are rarely used. For those
instances where they’re required, the drain plug ports can still be drilled and tapped on location. This change will be introduced as a running change starting immediately.
If you have any questions regarding this notification, please contact a technician or customer service representative to assist you.
.
**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**
Alternate Part Numbers
1-00-0187General
- Reference 3420820-1A
- In stock 10 items
16 other products in the same category:
Spa Motors & Pumps
Screw, Pump Housing, Jacuzzi, 10-12 x 1" PML Stainless Steel : 6500-548
Reference #6500-548
$1.60
Spa Motors & Pumps
Bath Pump, Balboa Gemini Plus II, 1.5HP, 115V, 12.5A, 1-1/2"MBT w/NEMA Cord : 0059F88C
Reference #0059F88C
$408.29
Spa Motors & Pumps
Wet End, AquaFlo FMCP/CMCP, 3/4HP 1/15hp, CD, 48-Frame, 1-1/2"MBT : 91040800-000
Reference #91040800-000
$68.70
Spa Motors & Pumps
Motor, Emerson, Thru-Bolt, 48-Frame, 2-Speed, 1.0HP, 115V, 3.8/10.3 Amp : AGL10FL2S
Reference #AGL10FL2S
$251.19
Spa Motors & Pumps
O-Ring, 2-9/16"ID x 2-3/4"OD x 3/32" Cross Section : 568-145
Reference #568-145
$0.31
Spa Motors & Pumps
Pump, Aqua-Flo FMCP, 1.5HP, CD, 48-Frame, 2-Speed, 115V, 14.4/5.5A, 1-1/2"MBT, Unions : 02615000-1010
Reference #02615000-1010
$449.19
Spa Motors & Pumps
Bath Pump, Waterway Genesis, Front/Top, 5.5A, 115V, 1-1/2"MBT w/Air Switch & NEMA Cord : 321FF10-1150
Reference #321FF10-1150
$138.24
Spa Motors & Pumps
Wear Ring, Pump, Jacuzzi Multiple Models, .5HP - 3.0HP : 10-1462-07
Reference #10-1462-07
$7.56
Customer reviews
No customer reviews for the moment.